Applying your transfers with a heat press
This is all you need.
-
Any Garment
-
Your Transfer
-
Heat Press
STEPS
1. Position
Take your time and line up your artwork in the desired print area.
2. Press
Press with medium pressure press your transfer at 300°F-320°F / 160°C (this is what we find has yielded the best results) for 12-15 seconds.
3. Cool & Peel
Remove pressure and heat and let your transfer rest for a minimum of 15 seconds. After letting your transfer rest it should be cool to the touch at which point lift the transfer from one corner and gently peel back apply even pressure
4. Final Press
Place the parchment paper included with your order on the design and press again for 15 seconds to enhance feel, increase durability and remove shine.
Applying your transfers with an iron
This is all you need.
-
Any Garment
-
Your Transfer
-
Iron
STEPS
1. Position
Position the transfer in the desired location. When in doubt, consult our DTF Transfer Size & Positioning Guide to avoid any potential errors
2. Press
Shoot for a setting on your iron that corosponds with the material you are using. While applying firm and even pressure pass the iron over your transfer for at least 15-20 seconds.
3. Cool
Remove iron and let your transfer rest for a minimum of 15 seconds.
4. Peel
Confirm that your transfer is cool to the touch before attempting to remove the film. Gently peel back the film starting at one corner using even pressure